Tengo una bomba hidraulica de unos flaps de un barco de recreo y no tengo idea de como hacer las conexiones. Dispone de 5 cables, alguien podría decirme a que corresponden y como conectarlo a corriente(12v) y hacer la conexión de 2 pulsadores?. Gracias
Si pones el modelo de bomba igual puedes encontrar un listado como este:
Red Port Valve
Green Starboard Valve
Blue Pump Pressure
Yellow Pump Retract
Black - Ground
orange + power ( 20 amp fuse )
Control is marked on bottom for color coding.
TESTING FUNCTION OF CONTROL.
(Refer to color coding above and it will clarify the following.) Remove wires from control. Touching the positive lead to the colors as shown at left should provide results as shown at right.
Positive with blue & red Port plane down
Positive with blue & green Starboard plane down
Positive with blue, red & green Both down simultaneously
Positive with yellow & red Port plane up
Positive with yellow & green Starboard plane up
Positive with yellow, red & green Both up simultaneously
Obviamente
no es tu bomba, pero igual puedes deducir algo
Un saludo